eapol

Configure Extensible Authentication Protocol (EAP) on a specific port when you do not want EAPol applied globally.

Syntax

default eapol enable
default eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} supplicant-timeout
default eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} transmit-interval
default eapol supplicant-timeout
default eapol transmit-interval
eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} fail-open-vlan <1-4059>
eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} guest-vlan <1-4059>
eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} max-request <1-10>
eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} quiet-interval <1-65535>
eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} supplicant-timeout <1-65535>
eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} supplicant-timeout <1-65535>
eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} transmit-interval <1-65535>
eapol status authorized
eapol supplicant-timeout <1-65535>
eapol transmit-interval <1-65535>
no eapol enable

fail-open-vlan <1-4059>: Specifies the fail open VLAN ID.
guest-vlan <1-4059>: Specifies the guest VLAN ID.
max-request <1-10>: Specifies the maximum number of attempts to send the packet to the supplicant.
quiet-interval <1-65535>: Specifies the time in seconds to wait between authentication failure and start of a new authentication.
supplicant-timeout <1-65535>: Specifies the time in seconds to wait for response from supplicant for all EAP packets except EAP Request/Identity.
transmit-interval <1-65535>: Specifies the time in seconds to wait for response from supplicant for EAP Request/Identity packets.

None

GigabitEthernet Interface Configuration